State-of-the-art industrial storage facility showcasing robotics technology in the supply chain, emphasizing distribution, automation, and the future of smart warehousing- 3D rendering


Key Takeaways:
• Identify operational gaps before investing in new technology.
• Combine digital tools with effective processes, training, and inventory management.
• Measure performance and validate solutions before expanding warehouse technology.


Technology is an efficiency godsend for jan/san distributors who find themselves tasked with moving more products and fulfilling orders faster, all while maintaining accuracy. At the same time, technology alone is not the answer. Successful operations combine digital tools with sound operational practices.

Picking software, handheld scanning systems, route optimization tools, and warehouse management platforms can provide the information and automation needed to improve performance. Thoughtful warehouse layouts, standardized procedures, employee training, and data-driven inventory management ensure those technologies are used effectively.

Together, these approaches can help distribution operations reduce errors, shorten fulfillment times, improve inventory visibility, and make better use of their workforce.

What to Consider

Before jan/san distributors rush out to purchase a warehouse management system (WMS) equipped with all the modern frills—and there are plenty—and expect their operation to quickly improve and grow overnight, they must consider what areas need improvement and work from there. But where and how should distributors begin?

“Distributors should invest in warehouse capabilities that help them serve customers reliably,” says Will Quinn, President at CAMM Consulting, and an author and speaker known in jan/san circles as "The Distribution Guy." “Whether that means a separate WMS depends on what their current system can do and where the operation falls short."

Quinn says that if a distributor's enterprise resource planning (ERP) system already supports its needs, and it is satisfied with the results, it probably doesn’t need a separate WMS.

“Start by looking at the gaps," he instructs. "Do employees spend too much time finding storage locations? Are pickers waiting for replenishment? Can supervisors see the work remaining before the trucks leave? If so, check if a better configuration or training closes those gaps first.”

When mulling over implementing or expanding an existing WMS, Quinn recommends starting with three areas.

First, take a close look at receiving and picking verification. Catching the wrong item or pack size before it moves downstream prevents credits, repicks, and redeliveries. For a distributor running its own trucks, a correction can mean another stop for the same order.

Second, review cycle counting with follow-through. Count regularly, investigate discrepancies, and fix the transaction or process that caused it—not just the number.

Third, evaluate the product placement backed by putaway and replenishment rules. Placing a fast-selling item closer to the pick path does little good if refilling it becomes a constant emergency.

“Before you change anything, set a baseline: picking accuracy, inventory accuracy by location, order release-to-ready-to-load time, lines per labor hour on comparable work, overtime, credits and redelivery costs, and orders ready before truck departure. Then, measure again,” Quinn explains. "Separate capacity from cash. Saving time may help your current team absorb growth. It does not automatically mean payroll goes down.”

Distributors employing warehouse management systems or components are seeing improvements in their processes and eyeing future expansion of those systems. When looking at implementation or expansion, distributors should visit a site actively using the system or components under consideration.

“A demo provides a prepared scenario, while a site visit shows people using the system on a working day," explains Quinn, "Visit an operation with similar products and delivery demands. Watch receiving, replenishment, and loading. Ask operators what slows them down, and supervisors what they wish they had known before go-live."

Implementing Change

Getting the software is one objective. Implementing it is another.

"Training employees to use the system is the utilization problem,” says Bruce Heller, President, Cavalier, Inc. “You can spend a lot of money and never use more than 20 percent of what's bought. I’m guilty of it.”

When implementing a new system and training employees, a repeatable hands-on cycle can be a better approach than classroom instruction. Smaller jan/san distributors should start small and scale when necessary.

“When we first implemented a WMS, our locations were broad, and we didn’t fully utilize all the features, mainly because it was scary and our muscle memory was to 'use the paper',” recalls Jose Guerrero, Vice President of Operations at Maintex. “As we got better, our locations became more detailed, and we began improving item slotting and pick sequence. A WMS can be a valuable tool for your warehouse when it is properly tuned and maintained.”

A good starting point would be to identify areas that are experiencing high picking errors, idle labor time (employees looking for items), and inventory shrinkage. Any of these disruptors eventually impacts customer performance.

Guerrero doesn't believe the systems offer a direct solution to labor challenges, although when looking at efficiency, he says there is an opportunity to reassess team setups. Where he does see considerable improvements are in picking rates, order fulfillment, and inventory integrity.

“If we didn’t have a WMS now, I wouldn’t know how we would be able to support our customers with the expected service level,” Guerrero says.

These systems also help optimize warehouse layout by collecting information from users as they move through the facility. This data can help steer future decision-making to achieve more favorable results.

“I would almost always recommend a WMS unless the footprint, product assortment, and order volume have not outpaced the velocity of manual processes,” Guerrero shares.

Heller also recommends implementing WMS in most cases. However, there are a few things he suggests jan/san distributors keep in mind. For one, as useful as a WMS can be, it’s not a standalone solution. In fact, it is reliant on an ERP, which in turn is tied to customer relationship management (CRM) software.

Size is another thing to consider. For some operations, implementing a WMS isn't worth it.

“WMS doesn't make sense if it's just five people, a handful of manufacturers filling the shelves, and a crew that knows what they’re doing—receiving by hand is not overwhelming," Heller explains. "You’re basically just getting product in and into the ERP. I wouldn’t spend the money on a warehouse system for that. A small business still lives and dies on the software it picks, though. The efficiencies are real either way.”

Ryan Fagan, Sales Executive, Fagan Sanitary Supply, says his company uses a modular system that suits its needs, with a focus on customer service. One of Fagan Sanitary Supply's recent efforts has been expanding online ordering capabilities. Sales reps can enter customers' orders, or customers themselves can place orders online.

Once orders are entered, the system switches from the order desk to the warehouse module. When the system flags orders for the warehouse, Fagan Sanitary Supply’s warehouse manager will review the routes and items needed and craft a weekly route for everyone involved.

"We might also do individual order staging, depending on what they feel is most efficient,” Fagan says, adding that hybrid batch picking could also take place. "If staff notices the need for a couple hundred paper towel cases or a couple hundred toilet tissue over the next couple days, they'll pull those close to the door.”

Ultimately, warehouse efficiency isn't achieved by software alone. The competitive advantage comes from putting the right technology into well-designed processes and giving employees the training and information they need to use those tools effectively.

Shannon O'Connor is a freelance writer from Mason, Ohio.