Restroom Cleaning Simplified In Six Steps
Kaivac recently shared a SIMPLE system for cleaning restrooms. The six-step system is presented in video format on the Kaivac website and can apply to any spray-and-vac cleaning systems.
"The SIMPLE system can also be used in most any commercial restroom," says Matt Morrison with Kaivac. "It helps ensure proper restroom cleaning and sanitation as more people return to the workplace."
The SIMPLE system includes the following components:
S. SET UP, adding the correct attachments to the hose. With most spray-and-vac systems, the chemical valve must be turned to the "on" position, and the pump turned on.
"Before applying to surfaces, pull the trigger sprayer and spray into a toilet for about 15 seconds first. This makes sure the chemical is in the gun," adds Morrison.
I. INJECT cleaning solution to all surfaces to be cleaned. Work backward toward the door.
"Disinfectants can also be injected onto high-touch areas," he says. "This should be done first before injecting cleaning solution to the entire restroom."
M. Occasionally, heavily soiled floor areas may need to be MANUALLY brushed to loosen soil.
P. PRESSURE rinse all surfaces from the top down. This rinses all cleaning solution and soil to the floor. When rinsing toilets, rinse the seat and chrome first, then lift the seat and clean the rest of the toilet, including the inside rim of the bowl.
L. LOOP the hose back on the machine using a clean towel. The towel helps dry the hose as it is placed back onto the machine.
E. EXTRACT all moisture and soil using the vacuum hose. Vacuum in a 45-degree, forward and backward motion. This improves efficiency, speeding up the entire cleaning process.
Disclaimer: Please note that Facebook comments are posted through Facebook and cannot be approved, edited or declined by CleanLink.com. The opinions expressed in Facebook comments do not necessarily reflect those of CleanLink.com or its staff. To find out more about Facebook commenting please read the Conversation Guidelines.