Along with mops and buckets, vacuums are one of the main staples of a building service contractor’s portable cleaning equipment arsenal. While the most obvious considerations when purchasing vacuums might pertain to upright vs. backpack models and cord length, BSCs should also be taking into account issues of sustainability.

Sustainability as it applies to vacuum cleaners can be defined by numerous indicators: the effect on frontline workers who use the machines, or ergonomics; noise pollution or lack thereof; particulates captured and indoor air quality; environmental impact, including a concern for what ends up getting thrown away; durability; repairability; and energy-efficiency.  
“Green” or “sustainable” features are a point of comparison when shopping around for any product or piece of equipment, says Steve Ashkin, cleaning industry sustainability expert and president of Bloomington, Ind.-based The Ashkin Group.

“You should literally be asking vendors what makes their products green compared to other products” he says. “It’s a totally appropriate question to ask.” 

The first step toward purchasing sustainable vacuum cleaners is to buy green products, such as those that contribute to better indoor air quality. The Carpet and Rug Institute (CRI), based in Dalton, Ga., offers its Seal of Approval rating system for vacuums, which tests for three things: soil removal, particulate containment and surface damage. Using a vacuum cleaner that is too aggressive for example can greatly reduce the life of that carpet, says Werner Braun, president of the CRI.

“You can go out and shop for carpet that has a lot of recycled content and a smaller environmental footprint, but you can blow that environmental footprint up if you’re using a bad vacuum cleaner on it,” Braun says. “That’s something a lot of people don’t think about with respect to green.”
Particle containment testing addresses the indoor air quality issue. Particles can be emitted through a poor filter, from underneath the vacuum housing — thanks to the turbulence of the brushes — and from wear and tear on the machine itself.

“A vast majority of the moving parts of a vacuum cleaner are made with synthetic materials, primarily plastic products, as well as carbon fibers and other materials,” Braun says. “Normal use of a vacuum cleaner creates emissions, as well.”

LEED-EBOM and CIMS-GB certifications require that vacuums have CRI’s Seal of Approval and operate at less than 70 decibels. Whether a BSC has clients with those certifications or not, it’s a good idea to consider purchasing equipment that qualifies in order to be prepared for such accounts, says Teresa Farmer, LEED-AP and green program specialist for Kelsan Inc., a distributor in Knoxville, Tenn.

“If the required equipment is not purchased up front, then a replacement will need to be purchased or the requirement for these certifications will not be met,” she says. “If there is a possibility that either of these certifications are in [a BSC’s] future, the wise decision would be to purchase the equipment that will be necessary for this process.”

next page of this article:
A Durable Vacuum Is A Sustainable One