Lighting Efficiency Improvements Proposed
Proposed changes to the ASHRAE/IES energy standard will require automatic lighting controls in more space types and shorten the times before lighting is automatically reduced or shut off.
Addendum by to ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low-Rise Residential Buildings, was developed in response to requests from the design community, which asked for a tabular structure for specifying the controls requirements. By putting these requirements into an easier-to-use tabular format, the provisions will be clearer, more likely to be complied with and easier to enforce, according to Eric Richman, chair of the standard’s lighting subcommittee.
The addendum is open for public review until April 1, 2013. For more information, visit www.ashrae.org/publicreviews.
“The proposed addendum is the product of both the interest in increasing lighting controls use where practical and simplifying the standard,” Richman said.
The 2010 version of the standard includes basic shutoff and occupancy sensor type controls in selected spaces. The addendum will increase the use of occupancy based control to all spaces in a building where practical. At the same time, additional partial on and partial off controls are added to further reduce full on lighting when spaces are typically unoccupied. For example, many spaces that are not always practical applications for full automatic off (such as corridors) would require at least partial automatic off when the space is unoccupied.
The new tabular format allows users to see all requirements for most interior space types and categories in one simple look-up table.
“This new representation and update of control requirements will reduce the time that lighting is on at full levels in many spaces and make the requirements easier to understand and therefore comply with and inspect to,” he said. “Both of these conditions will improve energy efficiency of the building.”
Disclaimer: Please note that Facebook comments are posted through Facebook and cannot be approved, edited or declined by CleanLink.com. The opinions expressed in Facebook comments do not necessarily reflect those of CleanLink.com or its staff. To find out more about Facebook commenting please read the Conversation Guidelines.